Atec Agilent-N6030A - Manual (Page 5)

5
The dynamic sequencing software
enables radar and military commu-
nications engineers to build custom
signal scenarios on the fly. Engineers
can dynamically access up to 16 k of
previously stored sequences through
a 16-bit interface and replay these
complex waveforms to respond to
changing threat environments, or
to create signals where the next
waveform to be played is not known
in advance.
The direct digital synthesis (DDS)
software enables radar and emerg-
ing communications engineers
to create basic waveforms in the
AWG’s memory and then modify their
behavior with profiles for amplitude
modulation, phase modulation, and
frequency modulation. This enables
engineers to simulate testing without
the time and expense of field trials,
such as in-flight and in-orbit test-
ing. This option can also be used to
simulate fading profiles in receiver
testing for satellite and 4 G signals,
such as multiple input and multiple
output formats (MIMO).
Dynamic Sequencing
(Option 300)
Dynamic Synthesis
(Option 330)
New! Enhanced capabilities for the N6030 Series!
Scenarios
16 k entries
16 bit
parallel
port
Sequences
32 k entries
Waveforms
up to 32 k segments
Figure 7. Create signals where next waveform to
be played is not known in advance.
Figure 8. Define signals by carrier frequency and modulation - instant by instant.