Atec Anritsu-MP1763C-64C-64D - Manual (Page 5)

5
q Eye Margin Measurement
Displays the phase margin and threshold margin.
w Synchronous Mode
High-speed sync. gain is achieved in frame and quick synchronous
modes.
e Error Analysis (Option 01)
The input pattern before and after a bit in which an error occurred
can be checked.
r Synchronous Threshold
The sync. gain and sync. loss conditions can be set.
t Non-Inverted DATA Input
Has a high input sensitivity of 50 mVp-p (typical value).
MP1764D Error Detector
y Inverted DATA Input (Option 02)
At differential input, this uses inverted DATA input.
u CLOCK Input
Input CLOCK determining phase evaluation of 0 or 1
Option 03 with CLOCK recovery function makes input unnecessary
when inputting data with a supported bit rate.
i Regenerated CLOCK Output (Option 03)
This outputs the CLOCK regenerated from DATA.
o Two GPIB Connectors
One is used for an external printer.
q w e
r
t y u i
o
MP1763C/1764C_E 04.6.24 3:02 PM Page 5