Atec Agilent-81133A-81134A - Manual

Agilent 81133A and 81134A
3.35 GHz Pulse Pattern Generators
Data Sheet
Version 1.3
Setting Standards
The Agilent 81133A and 81134A
3.35 GHz Pulse Pattern Generators
provide programmable pulse periods
from 15 MHz (66.6 ns) to 3.35 GHz
(298.5 ps) on all channels. With
frequency ranges this fast, the
transition time performance becomes
critical; the Agilent 81133A and
81134A perfom at less than 60 ps
transition. With a RMS jitter of
1.5 ps (typ), the best signal quality is
assured. The Delay Control Input and
the Variable Crossover Point func-
tionalities allow fast and easy Signal
Integrity measurements, including
emulation of real world signals by
adding jitter to clock or data signals
or by distorting the ‘eye’ for eye
diagram measurements.
81133A and 81134A
3,35 GHz Pulse Pattern
Generators
The need for pulse and pattern
generation is fundamental to
digital device characterization tasks.
The ability to emulate the pulse
and pattern conditions to which
the device will encounter in its
final application, is essential. This
emulation should include both typical
and worst case conditions. Accurate
emulation requires superlative signal
integrity and timing performance
along with full control over param-
eters that allow specific worst case
testing.
Key Features
• Pulse, Data Pattern and PRBS
generation from 15 MHz up to
3.35 GHz
• Data formats NRZ, RZ and R1
• 12 Mbit pattern memory per
channel
• Low jitter, high accuracy
• Fast transition times
• PRBS generation from
2 5 -1…2 31 -1
• Delay control input for
pre-defined jitter input
• Jitter emulation up to ± 250 ps
• Easy-to-use graphical user
interface
• 50 mV to 2 V
pp
output amplitude
• Differential outputs
• 1 or 2 channels