Atec Agilent-3000-X Series - Manual (Page 24)

24
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
* Gaussian Pulse: 4 Vpp maximum into Hi-Z; 2 Vpp maximum into 50 ohms.
** Sinc, Cardiac and Gaussian Pulse: ±1.25 V into Hi-Z; +- 625 mV into 50 ohms
*** Full resolution is not available at output due to internal attenuator stepping.
WaveGen – Built-in function/arbitrary waveform generator (specifications are typical) (Continued)
Frequency • Sine wave and ramp accuracy:
◦ 130 ppm (frequency < 10 kHz)
◦ 50 ppm (frequency > 10 kHz)
• Square wave and pulse accuracy:
◦ [50+frequency/200] ppm (frequency < 25 kHz)
◦ 50 ppm (frequency ≥ 25 kHz)
• Resolution: 0.1 Hz or 4 digits, whichever is larger
Amplitude • Range:
◦ 20 mVpp to 5 Vpp into Hi-Z**
◦ 10 mVpp to 2.5 Vpp into 50 ohms**
• Resolution: 100 μV or 3 digits, whichever is higher
• Accuracy: 2% (frequency = 1 kHz)
DC offset • Range:
◦ ±2.5 V into Hi-Z**
◦ ±1.25 V into 50 ohms**
• Resolution: 100 μV or 3 digits, whichever is higher
• Accuracy (waveform modes): ± 1.5% of offset setting ± 1% of amplitude ± 1 mV
• Accuracy (DC mode): ± 1.5% of offset setting ± 3 mV
Trigger output Trigger output available on Trig out BNC
Main Output • Impedance : 50 ohms typical
• Isolation: not available, main output BNC is grounded
• Protection: overload automatically disables output
Digital voltmeter (specifications are typical)
Functions ACrms, DC, DCrms, Frequency
Resolution ACV/DCV: 3 digits Frequency: 5.5 digits
Measuring rate 100 times/ second
Autoranging Automatic adjustment of vertical amplification to maximize the dynamic range of measurements.
Range meter Graphical display of most recent measurement, plus extrema over the previous 3 seconds .
Connectivity
Standard ports One USB 2.0 hi-speed device port on rear panel. Supports USBTMC protocol.
Two USB 2.0 hi-speed host ports, front and rear panel
Supports memory devices and printers
Optional ports GPIB, LAN (10/100Base-T), WVGA video out
Trigger out BNC connector on the rear panel. Supported modes: triggers, mask, and waveform generator
sync pulse