Atec Agilent-3000-X Series - Manual (Page 13)

13
Search and navigation
When capturing long complex waveforms using the
scope’s deep acquisition memory, manually scrolling
through stored waveform data to find specific events
of interest can be slow and cumbersome. But with the
InfiniiVision 3000 X-Series scope’s automatic search &
navigation capability, you can easily set up specific search
criteria and then quickly navigate to “found and marked”
events using the scope’s front panel forward and back
navigation keys. Available search criteria include: edges,
pulse width (time-qualified), rise/fall times (time-qualified),
runt pulses (time- and level-qualified), and serial.
Advanced parametric and serial bus triggering
With today’s more complex signals, it is also often neces-
sary to trigger on complex signal conditions in order to
synchronize the scope’s acquisition on specific events
of interest. Agilent’s InfiniiVision 3000 X-Series scopes
can trigger on the following conditions: edge, pulse width
(time-qualified), pattern, rise/rall time, Nth edge burst,
runt, setup & hold, video, USB 2.0 full/low speed, Serial1,
and Serial2.
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Other productivity tools
The oscilloscope captured
1 ms of a digital data stream.
It was able to find, mark,
and then quickly navigate to
20 “runt” pulses using the
search and navigation feature
Examples of advanced triggers
Quickly and easily set up or upgrade a
teaching lab
Teach your students what an oscilloscope is and how
to perform basic measurements with the Educator’s
Oscilloscope Training Kit (DSOXEDK). It includes training
tools created specifically for electrical engineering and
physics undergraduate students and professors. It contains
an array of built-in training signals, a comprehensive
oscilloscope lab guide and tutorial written specifically
for the undergraduate student and an oscilloscope
fundamentals PowerPoint slide set for professors and lab
assistants. For more information, refer to:
www.agilent.com/find/EDK .
30-day trial license
The 3000 X-Series comes with a one-time 30-day all-
optional-features trial license. You can choose to start
the 30-day trial at any time. In addition you can redeem
individual optional feature 30-day trial licenses at any
time by visiting
www.agilent.com/find/30daytrial . This
enables you to receive in effect 60 days of trial license of
each optional feature.