Atec Agilent-infiniium-90000 Series - Manual (Page 9)

9
Debug your toughest designs with confidence
Serial Data Equalization (N5461A or Option 012 on new scope purchases)
Measure at the pin and use equalization to see a virtual eye on the other side of an
equalizer. Model equalization techniques such as DFE, FFE, and CTLE.
This application is supported on all models.
For more information: www.agilent.com/find/SDE
Reduce receiver errors by opening tightly shut eyes.
Infiniium Remote Programming interface (Now standard on all Infiniium scopes)
Operate your Ininiium compliance and validation applications remotely using .NET
languages.
This application is supported on all models.
For more information: www.agilent.com/find/RPI
Control your applications remotely.
InfiniiSim Waveform Transformation and De-embedding Toolset (Basic: N5465A-001
or option 13 on new scope purchases. Advanced: N5465A-002 or Option 14 on new
scope purchases.)
The N5465A IniniiSim waveform transformation toolset for Ininiium Series
oscilloscopes provides the most lexible and accurate means to render waveforms
anywhere in the digital serial link. The conigurable system modeling allows you to
remove the deleterious effects of unwanted channel elements, simulate waveforms
with channels models inserted, view waveforms in physically un-probable locations,
compensate for loading of probes and other circuit elements, and do so simply and
quickly on the real-time oscilloscope.
This application is supported on all models.
For more information: www.agilent.com/find/InfiniiSim
Model channel effects including reflection .