Atec Agilent-1670G - Manual (Page 9)

9
Agilent Technologies 1670G Series (Option 003)
Oscilloscope Specifications and Characteristics
G eneral Information
Model number 1670G Option 003
Number of channels 2
Maximum sample rate 2 GSa/s per channel
Bandwidth [4] [8] dc to 500 MHz (real time, dc coupled)
Rise time [5] [8] 700 ps
Vertical resolution 8 bits full scale
Memory depth 32K samples
Oscilloscope Probing
Input coupling 1 M Ω: ac,dc
50 Ω: dc only
Input resistance [8] 1M Ω ±1%
50 Ω ±1%
Input capacitance ~ 7pF
Probes included Two Agilent 1160A probes; (10:1, 10 M Ω 9 pF 1.5 meters)
Vertical (at BNC)
Maximum safe input voltage 1 M Ω : ±250 V
50 Ω : 5 V rms
Vertical sensitivity range (1:1 Probe) 16 mV full scale to 40 V full scale
Probe factors Any integer ratio from 1:1 to 1000:1
Vertical (dc) gain accuracy [6] ± 1.25% of full scale
dc offset range (1:1 probe) ± 2V to ± 250V (depending on the vertical sensitivity)
dc offset accuracy [8] ± [1.0% of channel offset + 2.0% of full scale]
Voltage measurement accuracy [8] ± [1.25% of full scale + offset accuracy + 0.016 V/div]
Channel-to-channel isolation dc to 50 MHz – 40 dB; 50 MHz to 500 MHz – 30 dB
[4] Upper bandwidth reduces by 2.5 MHz for every degree C above 35°C.
[5] Rise time calculated as t
r
= 0.35
bandwidth
[6] Vertical gain accuracy decreases 0.08% per degree C from software calibration temperature.
[7] Specification applies at the maximum sam-pling rate. At lower rates, replace 150 ps in the formula with ( 0.15 x sample
interval) where sample interval is defined as 1/sample rate.
[8] Specifications valid within ± 10°C of auto-calibration temperature.