Atec Agilent-1670G - Manual (Page 4)

4
Figure 6. Trigger Screen
Figure 7. Graphical Trigger Function
Figure 8. Listing Display
Analyzer and oscilloscope or
pattern generator can cross-arm
each other. Arming is started by
Run, Group Run, or the PortIn
BNC (rising edge). PortOut is
asserted as a rising edge at the
PortOut BNC.
Twenty-three trigger functions
(shown graphically and textually)
can be combined to create custom
trigger sequences.
Up to twelve sequence levels with
branching and timers can be
defined.
Ten pattern recognizers (and bit
patterns in each label) can be
defined.
Edge terms make it easy to trigger
on rising or falling edges on any
number of specified signals. They
can also be used to trigger on
glitches to 3.5 ns.
Knob (or hold down right mouse
button) scrolls through listing dis-
play.
Markers measure the time
between events, search for specif-
ic events, and gather statistical
data.
Trigger is located at line 0.