Atec Agilent-1670G - Manual (Page 8)

8
PortIn arms logic analyzer 15 ns typical delay from signal input to a don’t care
logic analyzer trigger
PortIn arms oscilloscope 40 ns typical delay from signal input to an immediate
oscilloscope trigger.
Logic analyzer arms PortOut 120 ns typical delay from logic analyzer trigger to
signal output.
Oscilloscope arms PortOut 60 ns typical delay from oscilloscope trigger
to signal output
Arming skew Correction factors for nominal skew between displayed
timing and oscilloscope signals are built into the operating
system. Additional correction for unit-by-unit variation can
be made using the Skewfield. An entered skew value
effects the next (not the present) acquisition display.
Timing Analysis
Conventional timing Minimum sample period 4 ns / 2 ns, maximum sample
period 10 µs /2.5 µs.
Time covered = sample period x memory depth.
Printing Screen images can be printed in black and white or color
from all menus using the Print field. State or timing listings
can also be printed in full or part (starting from center
screen) using the Print All selection. Printers that use
the HP Printer Control Language (PCL) and have a parallel
Centronics, RS-232, or GPIB interface are supported.
Supported printers: HP DeskJet, LaserJet, QuietJet,
PaintJet, and ThinkJet models, as well as Epson FX80,
LX80, and MX80 printers with RS-232 or Centronics
interfaces in Epson 8-bit graphics mode.
Mass storage 2 GB internal hard disk drive, 1.44 Mbyte, 3.5-inch flexible
disk drive. The logic analyzer’s operating system resides
in Flash ROM and can be updated from the flexible disk
drive or from the internal hard disk drive.
File formats TIFF, color PCX, or black and white Encapsulated
Adobe ® PostScript ® (EPS) formats
Config files Logic analyzer and oscilloscope files that include
configuration and data information (if present) are
encoded in a binary format. They can be stored to or
loaded from the hard disk drive or a flexible disk. Binary
format configuration/data files are stored with the time of
acquisition and the time of storage
Trigger Resources
Patterns 10
Ranges 2
Edge and glitch 2 terms (timing only)
Timers 2
Occurrence counters 4
Trigger sequence levels 12 state / 10 timing
Setup/hold time 3.5/0 ns to 0/3.5 ns in .5 ns increments
Threshold range TTL, ECL, user-definable ±6.0 V adjustable
in 50 mV increments
Adobe ® PostScript ® is a registered trademark of Adobe Systems Incorporated.