Atec California-Instruments-i-iX_SeriesII - Manual (Page 7)

858.458.0223 [email protected] 175
i/iX Series : Product Specifications
Harmonic Measurements (iX series)
Parameter Range Accuracy (±) Resolution
Frequency fundamental 16.00 - 1000 Hz 2 counts 0.01 Hz to 1 Hz
Frequency harmonics 32.00 Hz - 16 kHz 2° typ. 0.5°
Voltage Fundamental 0.25V 0.01V
Harmonic 2 - 50 0.25V + 0.1% + 0.1%/kHz 0.01V
Current Fundamental 0.05A 0.01A
Harmonic 2 - 50 0.05A + 0.1% + 0.1%/kHz 0.01A
Accuracy specifications are times three for three phase mode. Harmonics frequency range in three-phase mode is 32 Hz - 16 kHz. Resolution decreases by factor
of 10 for 10001iX and 15001iX.
Remote Control
IEEE-488 Interface optional / USB standard IEEE-488 (GPIB) talker listener. Subset: AH1, C0, DC1, DT1, L3, PP0, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax (GPIB standard on iX)
RS232C Interface
(LAN Optional)
9 pin D-shell connector, Handshake: CTS, RTS, Data bits: 7,8, Stop bits: 1, 2, Baud rate: 9600, 19200, 38400, 57600, 115200, IEEE-488.2
SCPI Syntax (Supplied with RS232C cable). (RS232C Standard on iX - LAN Optional)
AC Input
Voltage 3001 and 9003: 208-240 ± 10% Vac, (L-N, 1ø), All other models: Standard: 208-240 ± 10% Vac, (L-L, 3ø), Option -400: 400-480 ± 10%
Vac, (L-L, 3ø) (Input range must be specified when ordering).
Input Line Current (per phase):
Model 3001i/iX 5001i/iX 9003i/iX 10001i/iX 15001i/iX 15003i/iX
187-264V 25 A 23 A 75 A 46 A 69 A 69 A
360-528V N/A 12 A N/A 24 A 36 A 36 A
Inrush Current per chassis < 100 Apk for 100 µs at 208-240 V, < 50 Apk for 100 µs at 400-480 V
Line Frequency 50-60 Hz ± 10 %
Efficiency 75% typical
Power Factor 0.6 typical
Regulatory IEC61010, EN50081-2, EN50082-2, CE EMC and Safety Mark requirements
RFI Suppression CISPR 11, Group1 , Class A
Rear Panel Connectors AC Input & Output terminal block with cover, IEEE-488 (GPIB) connector (rear panel), 9 pin D-Shell RS232C connector*, Remote voltage
sense terminal block, System Interface Connector, *RS232 DB9 to DB9 cable supplied
Mechanical
Dimensions Height: 7” (178 mm), Width: 19” (483 mm), Depth: 24” (610 mm) (depth includes rear panel connectors)
Weight per Chassis: Net: 61 lbs / 28 Kg, Shipping: 115 lbs / 52 Kg
Vibration and Shock Designed to meet NSTA project 1A transportation levels
Air Intake/Exhaust Forced air cooling, side air intake, rear exhaust.
Operating Humidity 0 to 95 % RAH, non condensing.
Temperature Operating: 0 to 40° C, Storage: -20 to +85° C
Constant Power AC Mode - Available Max. AC Current V-F Rating Chart - 300V Range
Note: Specifications are subject to change without notice. Specifications are warranted over an ambient temperature range of 25°± 5° C. Unless otherwise noted,
specifications are per phase for a sinewave with a resistive load and apply after a 30 minute warm-up period. For three phase configurations, all specifications are for L-N.
Phase angle specifications are valid under balanced load conditions only.
3000–15000 VA