Atec California-Instruments-i-iX_SeriesII - Manual (Page 10)

www.ProgrammablePower.com 178
i/iX Series
Supplied with
User Manual, Programming Manual, Software (all on CD ROM) and RS232C serial cable.
Options
Option Code Description
-160 RTCA/DO-160D and EUROCAE test firmware. Refer to -160 option data sheet for details.
-400 400-480 Volt Line to Line AC input.
-411 IEC61000-4-11 test firmware. See also EOS1/3.
-413 IEC61000-4-13 Harmonics and Interharmonics test firmware and hardware.
-704 Mil Std 704D/E test firmware. Refer to -704 option data sheet for details. 704F Software
-EOS-1 IEC61000-4-11 Electronic Output Switch (1 phase) Includes -411 option. Refer to EOS data sheet for details.
-EOS-3 IEC61000-4-11 Electronic Output Switch (3 phase) Includes -411 option. Refer to EOS data sheet for details.
-LKM Clock/Lock Master
-LKS Clock/Lock Auxiliary
-LNS Internal AC Line Sync.
-XLS External AC Line Sync adaptor. (-LNS and XLS are mutually exclusive)
-MODE-iX Switches between 1 and 3 phase output modes, for 9003iX or 15003i/iX only. (Separate box)
OMNI-1-18i Impedance matching network for single phase 3001i/iX or 5001i/iX to support IEC-1000-3-3 flicker tests.
OMNI-3-18i Impedance matching network for three phase 9003iX or 15003i/iX systems to support IEC-1000-3-3 flicker tests.
OMNI-3-37i Impedance matching network for three phase 30003i/iX systems to support IEC-1000-3-3 flicker tests.
-RMS Rackmount Slides.
-WHM Watt-Hour Measurement option.
-ABD Airbus Directive 0100.1.8 tests.
-AMD Airbus AMD24 tests.
-A350 Airbus A350 tests.
-AIRB Airbus test package (A380, A350, AMD24)
-B787 Boeing 787B3-0147 tests.
Cabinets Multi box iX Series II systems can be factory installed and wired in 19 inch cabinets. Cabinet configurations can be ordered by
preceeding the model number with a “C1-C4” prefix. Contact factory for pricing and details.