Atec Agilent-N8300A - Manual (Page 8)

8
Application
Software
N6301A-1FP 802.16 OFDMA measurement application (Mobile WiMAX)
N6301A-2FP 802.16 OFDM measurement application (Fixed WiMAX)
Available measurements
Transmitter
• Modulation analysis, results include:
o
Spectral flatness
o
Relative constellation error (RCE)
o
Power versus time
o
Channel power
o
IQ offset
o
Frequency error
o
Symbol clock error
• Adjacent channel leakage ratio (ACLR)
• Power statistics CCDF
• Spectrum emissions mask (SEM)
• Waveform
o
Average power
o
Peak power
Receiver 1
• PER
• RSSI
N6301A key specifications
Analyzer performance
Frequency specifications
Frequency range 1.765 to 1.815 GHz; 2.15 to 2.71 GHz; 3.3 to
3.8 GHz (Options 505 and 506); 4.8 to 5.875
GHz (Option 506 only)
Frequency resolution 250 kHz
Measurement bandwidth 10 MHz, 8.75 MHz, 7 MHz, 5 MHz
Amplitude specifications
Input amplitude range +23 to –70 dBm
Absolute power measurement accuracy
2.15 to 2.71 GHz; 3.3 to 3.8 GHz:
4.8 to 5.875 GHz: 1.765 to 1.815 GHz: 0.35dB (CW) typical (+23
to -60 dBm)
±0.6 dB (CW) (+23 to -50 dBm)
±0.3 dB (CW) typical (+23 to -70 dBm)
±0.8 dB (CW) (+23 to -50 dBm)
±0.35 dB (CW) typical (+23 to -50 dBm)
Residual error vector magnitude (EVM) 2.15 to 2.71 GHz; 3.3 to 3.8 GHz, 64QAM
OFDMA: <-40 dB (< 1% rms typical)
Signal-to-Noise Ratio (SNR) > 65 dB typical (2.15 to 2.71 GHz; 3.3 to 3.8
GHz)
>52dB typical (4.8 to 5.875 GHz)
RF Input VSWR < 1.6:1 typical (return loss >12.5 dB); (2.15
to 2.71 GHz);
< 1.8:1 typical (return loss: > 10 dB); (3.3 to
3.8 GHz; 4.8 to 5.875 GHz)
1 . Device under test (DUT) chipset control software is required for receiver measurements.