Atec Agilent-N8300A - Manual (Page 6)

6
Inputs and
Outputs
Front panel
RF In/Out
Connector Type-N female, 50 Ω nominal
RF output
Connector Type-N female, 50 Ω nominal
USB ports
Master (2 ports)
Standard Compatible with USB 2.0
Connector USB Type-A female
Output current 0.5 A nominal
Others (not used)
Probe power
Voltage/Current
+15 Vdc, ±7% at 150 mA max nominal
-12.6 Vdc, ±10% at 150 mA max nominal
Headphone jack
Rear panel
SOURCE REF IN Accepts a 10 MHz reference signal used to
frequency lock the internal timebase
Connector BNC female, 50 Ω nominal
Input amplitude range –3.5 to +20 dBm nominal
SOURCE 10 MHz OUT Outputs the 10 MHz reference signal used
by the internal timebase. Permanently
connected to the ANALYZER 10 MHz IN port
Connector BNC female, 50 Ω nominal
Output amplitude +3.9 dBm nominal
Input damage level +16 dBm
ANALYZER 10 MHz IN Permanently connected to the
SOURCE 10 MHz OUT port
Connector BNC female, 50 Ω nominal
Input amplitude range –5 to +10 dBm nominal
Input frequency 1 to 50 MHz nominal
Frequency range lock ±5 x 10 –6 of specified external reference
input frequency
ANALYZER 10 MHz OUT
Connector BNC female, 50 Ω nominal
Output amplitude ≥ 0 dBm nominal
Frequency 10 MHz (±10 MHz x frequency reference
accuracy)