Atec Anritsu-S412E - Manual (Page 14)

Page 15 of 28
LMR Master™ S412E Specifications
AM/FM/PM Signal Analyzers (Option 0509)
Measurements
RF Spectrum
AM/FM/PM
Audio Spectrum
(AM)
Audio Spectrum
(FM/PM)
Audio
Waveform
(AM)
Audio
Waveform
(FM/PM)
Summary
(AM)
Summary
(FM/PM)
Graphic
Display
Power (dBm)
vs. Frequency
Depth (%)
vs. Modulation
Frequency
Deviation
(kHz/rad) vs.
Modulation
Frequency
Depth (%)
vs. Time
Deviation
(kHz/rad)
vs. Time
None None
Numerical
Displays
Carrier Power
Carrier Frequency
Occupied
Bandwidth
AM Rate
RMS Depth
(Pk-Pk)/2 Depth
SINAD*
THD*
Distortion/Total
Vrms*
FM/PM Rate
RMS Deviation
(Pk-Pk)/2
Deviation
SINAD*
THD*
Distortion/Total
Vrms*
AM Rate
RMS Depth
(Pk-Pk)/2 Depth
SINAD*
THD*
Distortion/Total
Vrms* FM/PM Rate
RMS Depth
(Pk-Pk)/2 Depth
SINAD*
THD*
Distortion/Total
Vrms* RMS Depth (AM)
Peak + Depth
Peak – Depth
(Pk-Pk)/2 Depth
Carrier Power
Carrier
Frequency
Occupied
Bandwidth
AM Rate
SINAD*
THD*
Distortion/Total
Vrms*
RMS Deviation
(FM/PM)
Peak + Depth
Peak – Depth
(Pk-Pk)/2 Depth
Carrier Power
Carrier
Frequency
Occupied
Bandwidth
AM Rate
SINAD*
THD*
Distortion/Total
Vrms*
Setup Parameters
Frequency Center Freq, Span, Freq Step, Signal Standard, Channel, Channel Increment,
Set Carrier Freq
Amplitude Scale, Power Offset, Adjust Range
Setup Demod Type (AM, FM, PM), IFBW, Auto IFBW
Measurements RF Spectrum AM/FM/PM, Audio Spectrum (AM/FM/PM),
Audio Waveform (AM/FM/PM), Summary (AM/FM/PM), Average
Marker On/Off, Delta, Peak Search, Marker Freq to Center, Marker to Ref Lvl, Marker Table,
All Markers Off
Specifications
AM Modulation Rate: ± 1 Hz (< 100 Hz), ± 2% (> 100 Hz)
Depth: ± 5% for (Modulation rates 10 Hz to 100 kHz)
FM Modulation Rate: ± 1 Hz (< 100 Hz); ± 2% (100 Hz to 100 kHz)
Deviation Accuracy: ± 5% (100 Hz to 100 kHz)**
PM Modulation Rate: ± 1 Hz (< 100 Hz); ± 2% (100 Hz to 100 kHz)
Deviation Accuracy: ± 5% (deviation 0 to 93 Rad, rate 10 Hz to 5 kHz)**
IF Bandwidth 1 kHz to 300 kHz in 1-3 sequence
Frequency Span RF Spectrum: 10 kHz to 10 MHz
Audio Spectrum: 2 kHz, 5 kHz, 10 kHz, 20 kHz
RBW/VBW 30
Span/RBW 100
Sweep Time 50 µs to 50 ms (Audio Waveform)
* Requires Sinewave modulation
** IFBW must be greater than 95% occupied BW