Atec Anritsu-S412E - Manual (Page 11)

Page 12 of 28
LMR Master™ S412E Specifications
DMR2 Analyzer and DMR2 Talk-Out Coverage (Options 0591, 0592)
Measurements
DMR2 Analyzer
(Option 0591)
DMR2 Talk-Out Coverage
(Option 0592, requires Option 0031 GPS)
Received Power
Frequency Error
Modulation Fidelity
Color Code (hex)
RX & TX Timeslot
Symbol Rate Error
Symbol Deviation
BER Mobile Station: 1031 Hz, O.153, Voice, Silence, Idle and Control Channel
Base Station: 1031 Hz, 1031 Hz 1% BER, O.153, O.153 1% BER, Silence, TSCC BER
RSSI
Modulation Fidelity
Graphs
DMR2 Analyzer
(Option 0591)
DMR2 Talk-Out Coverage
(Option 0592, requires Option 0031 GPS)
Constellation
Linear Constellation
Spectrum [Spans(kHz) = 25,50,100,500,1000,5000]
Histogram
Eye Diagram
Summary Display Outdoor measured values are overlayed on a geo-tagged map and
exportable to both KML and CSV text (Requires option 0031 GPS
and a suitable GPS antenna)
Indoor measured values are referenced by creating touchscreen
points on a floorplan
Setup Parameters
Frequency Center Frequency
Amplitude Reference level, Scale, Ext Attenuation, Auto Range, Adjust Range
Setup Modulation Type (Base Station, Mobile Station), BER pattern (1031 Hz, O.153, Voice,
Control Channel, Silence, Idle)
Measurement DMR2 Analyzer, DMR2 Coverage
DMR2 Analyzer Active Graph, Maximize Active Trace, Graph Type, Symbol Span
Graph Type Constellation, Linear Constellation, Spectrogram, Histogram, Eye Diagram, Summary
Eye Diagram Symbol Span 2, 3, 4, 5
DMR2 Coverage
(Option 0592, requires Option 0031 GPS)
USB Memory File Format .dmr2, .kml, both
Log data on / off
Measured values are overlayed on a geo-tagged map and exportable to both KML and CSV text
RF Measurements (Option 0591) (temperature range 15 °C to 35 °C)
Received Power dBm ± 1.25 dB, ± 0.5 dB typical
Frequency Error Hz ± 10 Hz + Frequency Reference
Modulation Fidelity %
BER/MER %
Symbol Deviation Hz
Color Code Hex
Receive Timeslot
Transmit Timeslot
Symbol Rate Error mHz
Measurements (Option 0592)
Measured values are overlayed on a geo-tagged map and exportable to both KML and CSV text
Signal Generator
Setup Parameters
Generator On/Off
Tx Output Level - 120 dBm to 0 dBm
Tx Pattern 1031 Hz, O.153 (v. 52), Silence, 1031 Hz with 1% BER, O.153 (v. 52) with 1% BER,
TSCC (only available in Base Station Modulation Type), CW, AM and FM
RF Characteristics
Power Level Accuracy 2.0 dB (CW Pattern, temperature range 15 °C to 35 °C, -120 dBm to 0 dBm) Typical
Frequency Range 500 kHz to 1.6 GHz
Mod Fidelity 1.25 % max, 0.75 typical
Frequency Accuracy Same as Spectrum Analyzer