beautypg.com

Alpha Technologies EDSM User Manual

Page 17

background image

704-721-C0-004, Rev. D

17

Fig. 3-2, EDSM Details

3.0

Module Installation, continued

3.1

XMS2 Communication Module Removal Procedure, continued

7. Slide the inverter module out of the power supply.

8. Unscrew the captive mounting screws holding the existing comm module onto the

inverter module sheet metal.

9. Verify that the 2x9 pin jumper is in position, seated fully into the inverter module.

10. Align the XMS2 header on the EDSM with the 2x9 jumper and gently press into place.

11. Tighten the captive mounting screws into the inverter module.

Inverter Board

Connector

2x9 Jumper

Sheet Metal

EDSM

Connector

CaptiveMounting

Screw

AlphaBus

Connector

XMS2 Interface

Connector

OEM Embedded

Transponder Cable

Top View

Optional DT

Connector

Detail of XMS2

Interface Connector

AUX and Tamper

Connectors