Alpha Technologies CXPS-HD 48-1.2-225 - Manual (Page 19)

0530082-J0 Rev B Page 11 of 31
4.3 Power system assembly and mounting
The power system must be mounted in a clean and dry environment. Sufficient free space must be provided at
the front and rear of the power system in order to meet the cooling requirements of the rectifiers and to allow easy
access to the power system components.
The distribution panel requires at least 1RU (
1¾") of space (2RU recommended) above the highlighted
connection area of the unit to access to the connections.
4.3.1 Rack mounted systems
Attach the power system to the customer-provided relay rack using mounting screws and star washers. This will
ensure an electrical bond between the system chassis and relay rack.
The system may be mounted into a 19" rack in either a flush or center mount position. Use the 19"-to-23" rack
adaptors to mount into a 23" rack.