Alpha Technologies Micro Secure UPS - Manual (Page 47)

45
017-220-J0 Rev B
Password
Is used to set the Alpha Micro Secure’s password. The factory set password is 1111.
Figure 30 — UPS Maintenance: Password screen
The password is limited to 4 alphanumeric characters. The software will not accept more than 4 characters.
Figure 31 — UPS Maintenance: User Input screen
Any user input can be configured to perform a certain action in response to different trigger types and logic lev-
els. For example, if you want the Alpha Micro Secure to issue an intrusion alarm when the door is opened, you will
need to wire the door with a switch that triggers a user input every time the door is opened. The following proce-
dure describes how User Input 1 can be configured as an intrusion alarm input.
User Input
Three programmable User Inputs exist. Their functions are similar to the Dry Contact relays. Supported functions
include: (a) Shutdown, (b) User Alarm and (c) Self Test.