ABUS TVIP72000 User Manual
Page 53
53
PPPoE Setting
PPPoE active:
You can enter the Internet access data provided by your ISP (Internet service
provider) here manually. This is necessary if the IP camera is directly connected
to the Internet (without a router). Check this box to activate the PPPoE function.
PPPoE user name:
User identification for Internet access (max. 64 characters).
PPPoE password:
Password for Internet access (max. 32 characters).
Dynamic IP:
Display of the current public IP address.
Accept the settings by pressing “Save”. If the network configuration is changed,
then the camera must be restarted (System\Management\Restart).
DDNS Setting
DynDNS or DDNS (Dynamic Domain Name System) is a system used for updating domain name entries in
real time. The network camera is equipped with an integrated DynDNS client, which updates the IP address
independently via a DynDNS provider. If the network camera is positioned behind a router, we recommend
using the DynDNS function on the router.
The following diagram offers an overview of accessing and updating the IP address using DynDNS.
DDNS active:
Check this box to activate the DDNS function.
Protocol type:
Select a DDNS service provider here. You must have registered access for this
DDNS service provider (e.g.
www.dyndns.org
).
Server address:
IP address of the DDNS service provider.
Port:
Network port number of the DDNS service.
User name:
User ID for the DDNS account.
Password:
Password for the DDNS account.
Domain name:
Enter the registered domain name (host service) here (e.g.
myIPcamera.dyndns.org).
DynDNS.org
name server
192.168.0.3
195.184.21.78
name.dyndns.org
195.184.21.78
LAN
WAN
Internet
DynDNS
access data