ABUS TVVR20001 - Manual (Page 98)

Device menu
36
System Settings
Note
The “System Settings” menu is used to manage
all device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead to
data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu Setting Page
General Language, video, time, date,
mouse pointer, password, time
zones and other settings
Camera Adding, changing and selecting
analogue and IP cameras 37
Record All recording settings (type,
resolution, motion detection,
schedule etc.) 21
Network Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.) and network status
overview 45
Alarm Assignment and parameterisa-
tion of detectors to alarm inputs
and relay outputs 50
PTZ PTZ hardware parameters and
assignment to camera inputs 25
Menu Setting Page
RS232 No function 39
Display Display settings and assignment
of the event output 20
Exception Behaviour of the device in excep-
tional cases (HDD full, network
disconnected etc.) 40
User Adding and changing users, as-
signing authorisation rights 40
Note
Pay attention to the instructions in the correspond-
ing sections.
General Settings
20
“General” tab Setting
Language Language on the OSD
CVBS Output
Standard PAL / NTSC
VGA Resolu-
tion Resolution on the monitor
Time Zone GMT (Greenwich Mean Time)
Menu Date
Format MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD
System Time Date and time
Mouse Pointer
Speed Set on the scroll bar (left =
low speed; right = high speed)
Enable Pass-
word Box not ticked:
In order to enter a menu no password
has to be entered. At access by net-
work the password has to be entered.
Box ticked:
Password must be entered in order to
use the menu.