ABUS TVVR20001 - Manual (Page 110)

Network
48
Setting the HOST / OTHERS
Leg en Si e i
Parameter Setting
Alarm Host IP No function
Alarm Host Port No function
Server Port Port for data communication
HTTP Port Port for web server
Multicast IP In order to minimize traffic you can
enter a Multicast IP. The IP address
has to match the IP address of the
PC running the CMS software.
MTU Describes the max. size of the largest
protocol data .
Note
Server port 8000 and HTTP port 80 are the stan-
dard ports for remote clients and remote Internet
browser access.
Setting up an e-mail address
In the event of an alarm, the device can send a message
by e-mail. Enter the e-mail configuration here:
Leg en Si e i
Parameter Setting
Server Au-
thentication Tick the box when authentication is
made on the server of the Internet pro-
vider
User Name E-mail account at the provider
Password Password connected to the e-mail ac-
count
SMTP Server SMTP server address of the provider
From Name Name of the sender
From Email
Address Corresponding e-mail address for the
e-mail account
Select Recipi-
ents Select three possible recipients for the
e-mail
To Name Enter the name of the recipient here
To Email Ad-
dress Enter the e-mail address of the
recipient here
“Advanced”
tab
Setting
Attached
JPEG File Tick the box when camera images
should also be sent with the e-mail as
photo files
Interval Select the interval between the
individual recordings (2 to 5 seconds)
SMTP Port Enter the SMTP port here
(Default: 80)
SSL Tick the box to activate the e-mail
encryption