ABUS TVVR20001 - Manual (Page 87)

PTZ control
25
PTZ control
General information
PTZ control is used to access individual PTZ cameras
and control them manually.
Note
When using ABUS PTZ-Cameras there is the op-
tion to configure tours directly in the camera. The
advantage is that other control devices, e.g. key-
board, can call the tours as well.

In order to open the menu of ABUS PTZ-
Cameras enter Preset 95. By using the naviga-
tion buttons you can move within the menu.
Using the PTZ control panel
No. Meaning / function
1 Selects and displays the PTZ camera
2 Call presets
3 Call tours
4 Keypad
5 Speed
6 Zoom, focus and iris adjustment
7 Exits the PTZ control
Pop-up menu for mouse operation
Note
Press the right mouse button when the cursor is
positioned on a live image.
The following settings can be made. The arrow pointing
to the right indicates that a sub-menu is opened for selec-
tion:
Camera PTZ camera selection
Call Preset Selects the set preset
Call Patrol Selects the specific patrol
Call Pattern Selects the defined pattern
Preset Settings See page 26
Patrol Settings See page 27
Pattern Settings See page 27
PTZ Menu Opens the PTZ menu
PTZ
Settings Displays the hardware parameters
of the connected camera
Exit Exits the PTZ control
1 2 3 4 5
6
7