Cla-Val 250-01/605-01 - Manual (Page 15)

100-01
Hytrol Valve Service Data
MODEL
INSTALLATION / OPERATION / MAINTENANCE
Description 100-01 Hytrol Valve
The CIa-VaI Model 100-01 Hytrol Valve is a main valve for
CIa-VaI Automatic Control Valves. It is a hydraulically operated,
diaphragm-actuated, globe or angle pattern valve.
This valve consists of three major components; body, diaphragm
assembly, and cover. The diaphragm assembly is the only
moving part. The diaphragm assembly uses a diaphragm of nylon
fabric bonded with synthetic rubber. A synthetic rubber disc,
contained on three and one half sides by a disc retainer and disc
guide, forms a seal with the valve seat when pressure is applied
above the diaphragm. The diaphragm assembly forms a sealed
chamber in the upper portion of the valve, separating operating
pressure from line pressure.
Description 100-20 600 Series Hytrol Valve
The CIa-VaI Model 100-20 Hytrol Valve (600 Series main valve)
have only one part -the body- that is different from standard 100
Series Cla-Val main valve parts. The remaining parts of the 600
series main valve are standard Cla-Val main valve parts.
All service and maintenance information for the standard 100
Series main valves also apply to the 600 series main valves.
The most important thing to remember when ordering main
valve repair kits and replacement parts, except for the body, all
other parts are going to be for a smaller size main valve. Cla-
Val identifies main valve parts with the flange size of the stan-
dard 100 Series main valve. Refer to the "Main Valve Sizes”
chart below.
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
8”
10”
12”
14”
16”
24”
25
32
40
50
65
80
100
150
200
250
300
350
400
600
100-01
HYTROL SIZE Stem
Travel
Cover Capacity
Displacement
Valve Stem
Thread
UNF-Internal
Cover
Center
Plug NPT
4”
6”
8”
10”
12”
16”
20”,24”
100
150
200
250
300
400
600
0.3
0.4
0.4
0.6
0.7
0.8
1.1
1.7
2.3
2.8
3.4
3.9
4.5
6.5
8
10
10
15
18
20
23
43
58
71
86
99
114
165
0.020
0.020
0.032
0.043
0.080
0.169
0.531
1.26
2.51
4.0
6.5
9.5
29.0
0.07
0.07
0.12
0.16
0.30
0.64
2.00
4.80
9.50
15.10
24.60
36.20
108.80
1/4”
1/4”
1/4”
1/2”
1/2”
1/2”
3/4”
3/4”
1”
1”
1 1/4”
1 1/2”
2”
3/4”
1/4” - 20 (B)
5/16” - 18 (B)
5/16” - 18 (B)
3/8” - 16 (B)
7/16” - 14 (B)
1/2” - 13 (B)
3/4” - 10 (B)
3/4” - 10 (B)
3/4” - 10
7/8” - 9
1-1/8” -7
1-1/4” -7
1-1/4” -7
1-1/2” -12
10-32
10-32
10-32
10-32
1/4 - 28
1/4 - 28
3/8 - 24
3/8 - 24
3/8 - 24
3/8 - 24
3/8 - 24
1/2 - 20
3/4 - 16 *
100-20 Thread
(Bolt)
7/16”
1/2”
1/2”
9/16”
5/8”
3/4”
1 1/8”
1 1/8”
1 1/4”
1 7/16
1 13/16
2”
2”
2 3/8”
Socket
5/8” - 11
3/4” - 10
3/4” - 10
1” - 8
1” - 8
1-1/8” 7
Cover
Lifting
Holes UNC
Liters
8
8
8
8
8
8
8
12
16
20
20
20
20
24
Qty
3/8”
1/2”
1/2”
3/4”
3/4”
1”
1”
1”
1”
1”
1”
Thread
3/8” - 24
7/16” 20
7/16” 20
1/2” - 20
5/8” - 18
5/8” - 18
3/4” - 16
7/8” - 14
1 1/8” - 12
1 1/2” - 12
1 1/2” - 12
1 1/2” - 12
2” - 16
3” - 12
Thread
3/4”
15/16”
15/16”
1 1/16”
1 5/16”
1 13/16”
1 7/8”
2 1/2”
2 1/2”
3”
Special
Socket
(Long)
7/16”
9/16”
9/16”
5/8”
5/8”
13/16”
13/16”
13/16”
13/16”
13/16”
13/16”
Socket
4
8
8
12
20
30
110
110
110
160
390
545
545
800
ft. Lbs.
48
96
96
in. Lbs.
4
6
6
10
21
21
40
85
125
250
270
280
500
1350
Lubed
6
10
10
15
30
30
60
125
185
375
400
420
750
N/R
DRY Gallons mm mm mm inches inches inches
Cover Nut or Bolt Cover Plug Cover Torque Stem Nut ** Stem Nut Torque
(ft Lbs)
Grade 5 Bolts
“Heavy” Grade Nuts
Tighten cover nuts in a “star” cross-over pattern
* Adapter p/n 2594101E
inside 1/4” - 28
**Must Use ONLY
Cla-Val Supplied part
HYTROL Service Data