Physio-Control LIFEPAK 1000 - Manual (Page 76)

Changing Setup Options
D-6 LIFEPAK 1000 Defibrillator Operating Instructions
Access the Set Passcode screen, shown in Figure D-3 , from the top-level Setup menu.
Figure D-3 Set Passcode Screen
Use the INCREASE and DECREASE softkeys and the MENU button to set the passcode. Be sure
to record the new passcode—the passcode is required each time you enter Setup mode.
Access Service mode, shown in Table D-9 , from the top-level Setup menu.
Table D-9 Service Setup Menu
Menu Item Help Message Options
DEFIB CAL Start defibrillator calibration.
PIXEL TEST Test display pixels.
SERVICE LOG Show service log.
SERVICE DATA Show device data.
DEVICE LOG Display device log.
SET PASSCODE Set Service mode access
passcode.
SETUP MODE Go back to Setup mode.
Setup / Set Passcode
Set Setup Mode passcode
Press button to set
Increase Decrease