Changing setup options – Physio-Control LIFEPAK 1000 User Manual

Page 71

Changing Setup Options

LIFEPAK 1000 Defibrillator Operating Instructions

D-1

CHANGING SETUP OPTIONS

Setup options allow you to define operating features for your defibrillator, such as CPR intervals.
Setup options are listed in tables beginning with

To enter Setup mode:

1 Ensure that no electrodes or cables are connected to the defibrillator.

2 Press and hold both softkeys and press the

ON/OFF

button. The Enter Setup Mode screen

appears.

Figure D-1

Enter Setup Mode

3 Enter the Setup mode passcode. The factory default passcode is 0000—press the

button four times to accept the default passcode. For information on how to change the
passcode, see

Note:

To exit Setup mode, turn the defibrillator off. If you changed the setup options, the

changes are saved and will appear the next time you turn the defibrillator on. (Refer to Setup
menu options that follow.)

Setup

Increase

Decrease

Press button to set

Enter Setup Mode passcode