Physio-Control LIFEPAK 1000 - Manual (Page 74)

Changing Setup Options
D-4 LIFEPAK 1000 Defibrillator Operating Instructions
Access Energy Protocols from the AED menu. The underlined bold options in Table D-5 are the
factory default settings.
Access CPR Setup from the AED menu. The underlined bold options in Table D-6 are the factory
default settings.
Table D-5 AED Setup Menu—Energy Protocols Submenu
Menu Item Help Message Options
ENERGY 1 Select energy level for shock 1. 150, 175, 200 , 225, 250, 275, 300, 325,
360 * joules .
* When selecting 360 joules for energy 1, consider AED use in children.
ENERGY 2 Select energy equal to or
greater than Energy 1. 150, 175, 200, 225, 250, 275, 300 , 325,
360 J oules .
ENERGY 3 Select energy equal to or
greater than Energy 2. 150, 175, 200, 225, 250, 275, 300, 325 ,
360 joules .
FLEXIBLE
PROTOCOL Repeat previous energy after
NO SHOCK ADVISED (only
when NO SHOCK ADVISED
follows a shock).
ON , OFF .
STACKED
SHOCKS Enable consecutive shocks
without CPR. ON , OFF .
PREVIOUS PAGE Go back to previous page.
Table D-6 AED Setup Menu—CPR Submenu
Menu Item Help Message Options
CPR TIME 1 Set CPR interval after shocks. 15, 30, 45, 60, 90, 120 , 180 seconds .
CPR TIME 2 Set CPR interval after NO
SHOCK ADVISED .
15, 30, 45, 60, 90, 120 , 180 seconds .
INITIAL CPR Enable Initial CPR. OFF , ANALYZE FIRST, CPR FIRST .
INITIAL CPR TIME Set CPR interval after first
analysis. 15, 30, 45, 60, 90, 120 , 180 seconds.
PRESHOCK CPR Set CPR interval before
SHOCK ADVISED decisions.
OFF , 15, 30 seconds .
CPR PROMPT Enable extended CPR prompt:
PROVIDE RESCUE BREATHS
AND CHEST COMPRESSIONS
ON , OFF .
PREVIOUS PAGE Go back to previous page.