Gotham 4 DTH T4_T6 Adjustable Accent SpecSheet User Manual
4” dth

Luminaire Type:
Catalog Number
(autopopulated):
© 2006-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/24/14. Specifications subject to change without notice.
PAGE 1 OF 3
DTH-4-ADj-AccEnT
Gotham Architectural Downlighting
HID Downlights
4” DTH
T4/T6 Adjustable Accent
Ceramic Metal Halide Lamp
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
OPTICAL SYSTEM
•
Center Beam optical system centers the lamp relative to the true aperture,
optimizing lamp efficiency.
•
Tool-less O°- 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during relamping and are visible from below the ceiling with trim
assembly removed.
•
Self-flanged, semi-specular or matte-diffuse anodized cone designed to
minimize backflash. Contour cut reduces visibility of inner housing.
•
Interchangeable upper reflectors provide narrow, medium and wide distributions.
These preset distribution patterns allow designers to achieve various design
objectives.
•
1/8” thick softening lens eliminates beam striations and ensures maximum
efficiency. Provides required protective shielding.
•
Optical system retained by self-aligning torsion support springs.
•
Internal housing components painted black.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
•
Tool-less re-lamp capability from above or below ceiling.
•
16-gauge galvanized steel mounting bars with continuos 4” vertical adjustment
are shipped pre-installed. Post installation adjustment possible without the use
of tools above or below ceiling.
•
Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2”-3/4” and two 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
•
Secondary housing adjustment system for precise, final ceiling to flange alignment.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box and ballast through the
aperture.
•
G12, G8.5 or PGJ5 base ceramic socket.
•
Pre-wired, electronic, 120 or 277V ballast module is standard. Assembly can be
attached before or after mounting of mounting/plaster frame.
•
Thermally-activated insulation detector.
•
3000 K lamp ships standard.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: DTH T4T 20MHC 4ACT30 N LD 120
Series Lamp type Wattage/Lamp
Aperture/Trim color
Type
Distribution
Finish
Voltage
DTH
T4T
1,2
T4
3
T6
3
20MHC
9
39MHC
70MHC
4AC
clear
4BC
4
Black
4PC
Pewter
4WTC
Wheat
T30
cut for angles 25°-40°
T20
cut for angles 15°-25°
T00
cut for angles 0°-15°
N
narrow
M
Medium
W
Wide
(blank)
Semi-specular
LD
Matte-diffuse
120
277
347
5
Ballast
Options
(blank) Electronic ballast
EMB
Electro-magnetic
ballast
QRS
6
Quartz restrike system (uses 100W max. Dc base quartz lamp
by others)
QRSTD
7
Quartz restrike system with time delay
EC
8
Emergency circuit (Dc socket with leads for connection to
external emergency power source; 100W max. lamp)
SF
Single fuse
TRW
White painted flange
TRBL
Black painted flange
L/LP
Less lamp
RRL
9
RELOc
®
-ready luminaire. Provides compatibility with Lithonia
RELOc system. Access above ceiling required.
CP
chicago plenum
ORDERING NOTES
1.
Philips Mini MasterColor
®
available in 20W & 120V only.
2.
Available with electronic ballast and 120V only.
3.
Available in 39W and 70W only.
4.
Not available with finishes.
5.
Available with 70W electro-magnetic ballast only.
6.
Not available with QRSTD.
7.
Not available with QRS.
8.
Not available with QRS or QRSTD.
9.
For compatible RELOC system, refer to