Gotham 6 DTH T6 Adjustable Accent SpecSheet User Manual
6” dth
Luminaire Type:
Catalog Number
(autopopulated):
© 2006-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 11/11/13. Specifications subject to change without notice.
PAGE 1 OF 3
DTH-6-ADj-AccEnT
Gotham Architectural Downlighting
HID Downlights
6” DTH
T6 Adjustable Accent
Ceramic Metal Halide Lamp
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
OPTICAL SYSTEM
•
Center Beam optical system centers the lamp relative to the true aperture,
optimizing lamp efficiency.
•
Tool-less O°- 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during relamping and are visible from below the ceiling with trim
assembly removed.
•
Self-flanged, semi-specular or matte-diffuse anodized cone designed to
minimize backflash. Contour cut reduces visibility of inner housing.
•
Interchangeable upper reflectors provide narrow, medium and wide distributions.
These preset distribution patterns allow designers to achieve various design
objectives.
•
1/8” thick softening lens eliminates beam striations and ensures maximum
efficiency. Provides required protective shielding.
•
Optical system retained by self-aligning torsion support springs.
•
Internal housing components painted black.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
•
Tool-less re-lamp capability from above or below ceiling.
•
16-gauge galvanized steel mounting bars with continuos 4” vertical adjustment
are shipped pre-installed. Post installation adjustment possible without the use
of tools above or below ceiling.
•
Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2”-3/4” and two 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
•
Secondary housing adjustment system for precise, final ceiling to flange alignment.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box and ballast through the
aperture.
•
G12 base ceramic socket.
•
Pre-wired, electronic, 120 or 277V ballast module is standard. Assembly can be
attached before or after mounting of mounting/plaster frame.
•
Thermally-activated insulation detector.
•
3000 K lamp ships standard.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: DTH T6 39MHC 6ACT30 N LD 120
Series Lamp type Wattage/Lamp
Aperture/Trim color
Type
Distribution
Finish
Voltage
DTH
T6
39MHC
70MHC
150MHC
1
6AC
clear
6BC
2
Black
6PC
Pewter
6WTC
Wheat
T30
cut for angles 25°-40°
T20
cut for angles 15°-25°
T00
cut for angles 0°-15°
N
narrow
M
Medium
W
Wide
(blank)
Semi-specular
LD
Matte-diffuse
120
277
347
3
Ballast
Options
(blank) Electronic
ballast
EMB
Electro-
magnetic
ballast
QRS
4
Quartz restrike system (uses 100W max. Dc base quartz lamp by others)
QRSTD
5
Quartz restrike system with time delay
EC
6
Emergency circuit (Dc socket with leads for connection to external
emergency power source; 100W max. lamp)
SF
Single fuse
L/LP
Less lamp
TRW
White painted flange
TRBL
Black painted flange
RRL
7
RELOc
®
-ready luminaire. Provides compatibility with Lithonia
RELOc system. Access above ceiling required.
CP
chicago Plenum
ACCESSORIES order as separate catalog numbers (shipped separately)
F700
9
Filters and beam shaping lenses
ORDERING NOTES
1.
California Title 20 compliant.
2.
Available with electronic ballast and 120V only.
3.
Available with 70W & 150W electro-magnetic ballast only.
4.
Not available with QRSTD.
5.
Not available with QRS.
6.
Not available with QRS or QRSTD.
7.
For compatible RELOC system, refer to
8.
Refer to
TECH-120
for lens color availability.