Gotham 8 DP PAR Directional SpecSheet User Manual
8” dp
Luminaire Type:
Catalog Number
(autopopulated):
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 08/12/13. Specifications subject to change without notice.
PAGE 1 OF 3
DP-8-PAR-DIREctIOnAL
Gotham Architectural Downlighting
Line Voltage Incandescent
8” DP
PAR Directional
Par Lamp
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
OPTICAL SYSTEM
•
Self-flanged, semi-specular clear, matte-diffuse or highly specular cone
designed to minimize back flash. Contour cut reduces visibility of inner housing.
•
Center Beam optical system centers the lamp relative to the true aperture,
optimizing lamp efficiency.
•
Tool-less 0°- 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during re-lamping and are visible from below the ceiling with
trim assembly removed.
•
Designed to allow hot aiming.
•
Trim assembly retained by self-aligning torsion springs.
•
Internal housing components painted black.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
•
Re-lamp capability from above or below ceiling.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Previous installation adjustment possible
without the use of tools above or below ceiling.
•
Secondary housing adjustment system for precise, final flange to ceiling
alignment.
•
Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2” - 3/4” and one 1/2” knockout for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box through the aperture.
•
Medium base porcelain socket with nickel-plated screw shell.
•
Thermally-activated insulation detector is replaceable without the use of tools.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: DP PAR16-30S 8ACT30 LD TRW
Series Wattage/Lamp
Aperture/Trim color
Type
Finish
DP
PAR16-30S
PAR16, PAR20 and PAR30S (short-
neck,75W max.) compatibility
PAR30L-38
PAR30L (75W max.) and PAR38 (250W
max.) compatibility
PAR46
PAR46 (200W max.) compatibility
PAR56
PAR56 (300W max.) compatibility
8AC
clear
8BC
1
Black
8PC
Pewter
8WTC
Wheat
8GC
Gold
8WC
1
White painted
8MB
1
Black baffle
8WB
1
White baffle
T30
cut for angles 25°-40°
T20
cut for angles 15°-25°
T00
cut for angles 0°-15°
(blank)
Semi-specular
LD
Matte-diffuse
LS
Specular
Options
SDT
2
277V stepdown transformer (277V to 120V). Add 4” to width of fixture
SDT347
2
347V stepdown transformer (347V to 120V). Add 4” to width of fixture
(75W max)
TRW
White painted flange (Standard with Wc, MB, and WB.)
TRBL
Black painted flange
SF
2
Single fuse
RRL
3
RELOc
®
-ready luminaire. Provides compatibility with Lithonia RELOc system. Access
above ceiling required.
CP
chicago plenum
ACCESSORIES order as separate catalog numbers (shipped separately)
LFH701
Locking Filter Holder for use with PAR16-30S.
LTWFH500 DBL Filter Holder for use with PAR30S & PAR30L
F700
4
Lens for use with 700 series filter holder
LFH702
Locking Filter Holder for use with PAR30L-38
LTWFH700 DBL Filter Holder for use with PAR38
F800
4
Lens for use with 800 series filter holder
LFH703
Locking Filter Holder for use with PAR46 and PAR56
F400
4
Lens for use with 400 series filter holder
GFC800 Gotham Filter clips for use with PAR46
LTWFH400 DBL Filter Holder for use with PAR20
F500
4
Lens for use with 500 series filter holder
and PAR56