Gotham 6 VRA Lightshield SpecSheet User Manual
6” vra
Luminaire Type:
Catalog Number
(autopopulated):
© 2012-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 09/10/13. Specifications subject to change without notice.
PAGE 1 OF 3
VRA-6-LEnSEd
Gotham Architectural Downlighting
Vandal Resistant Incandescent Downlights
6” VRA
Lightshield™
A19, A21 Lamp
OPTICAL SYSTEM
•
Self-flanged semi-specular, matte-diffuse or specular reflector. Patented Bound-
ing Ray™ Optical Principle design (U.S. Patent No. 5,800,050) provides lamp
before lamp image and smooth transition from top of reflector to bottom.
•
Marine-grade die-cast aluminum bezel, low copper alloy (<1% copper). Matte
white (DWHG) standard. Stainless steel Torx
®
T20 tamper-resistant screws.
•
Perimeter lens gasket is one-piece closed-cell silicone “O” ring. Perimeter
ceiling gasket is closed-cell silicone that seals bezel to ceiling.
MECHANICAL SYSTEM
•
16-gauge galvanized steel mounting/plaster frame with friction support springs
to retain optical system. Maximum 7/8” thick ceiling standard.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Post-installation adjustment possible without
the use of tools from above or below ceiling.
•
Galvanized steel junction box with hinged access covers and spring latch. Two
combination 1/2”-3/4” and two 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
ELECTRICAL SYSTEM
•
Die-cast aluminum lampholder housing.
•
Medium-base porcelain socket with nickel-plated screw shell.
•
Thermally-activated insulation detector.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and wet
locations. Listed and labeled to comply with Canadian standards.
•
IP55 rating (below the mounting surface) is standard. IP65 rating possible with
the use of silicone.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: VRA 6AR T73 DWHG
Series
Aperture/Trim color Finish
Lens type
Options
VRA
6AR
Clear
6PR
Pewter
6WTR
Wheat
6GR
Gold
6WR
1
White painted
(blank) Semi-
specular
LD
Matte-
diffuse
LS
Specular
CGL
2
1/8” clear glass lens
T73
2
3/16” tempered
prismatic glass lens
FOL
2
1/8” tempered flush
opal glass lens
CVX
2
3/16” clear convex
glass lens
PCL
3,4
3/16” clear polycar-
bonate lenses
PPC
3,4
1/8” prismatic poly-
carbonate lenses
SDT
Stepdown transformer (277V to 120V)
SDT347
Stepdown transformer (347V to 120V;
75W max.)
RRL
5
RELOC
®
-ready luminaire. Pro-
vides compatibility with Lithonia
RELOC system. Access above ceiling
required.
CP
Chicago plenum
WG
Zinc-plated wire guard
PCU
6
3/16” clear polycarbonate lens
underlay (roomside)
WRL
7
Wattage restriction label
Architectural Colors - Powder Paint
8
DWHG
Matte white (standard)
DDB
dark bronze
DBL
Black
DWH
Gloss white
DMB
Medium bronze
DNA
natural aluminum
Architectural Colors - Plating
PWR
Pewter
SCH
Satin chrome
ORB
Oil-rubbed bronze
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
ORDERING NOTES
1.
Not available with finishes.
2.
Maximum wattage: 100W A19-IF lamp; 150W A21-IF lamp.
3.
Maximum wattage: 75W A19-IF or A21-IF lamp.
4.
Provided standard with clear polycarbonate underlay (2 lenses total).
5.
6.
Not available with CVX, PCL or PPC lens.
7.
Must specify wattage. Ex.: WRL60
8.