Gotham AFI_AFWI 15.2cm (6) Open_Wallwash SpecSheet User Manual
Afi/afwi
Luminaire Type:
Catalog Number
(autopopulated):
© 2010-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 06/26/13. Specifications subject to change without notice.
PAGE 1 OF 3
AFI-AFWI-6
Gotham Architectural Downlighting
International Compact Fluorescent Downlights/Wallwash
AFI/AFWI
15.2cm (6”) Open/Wallwash
Horizontal DTT or TRT Lamp
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
OPTICAL SYSTEM
•
Reflector: Self-flanged, semi-specular or matte-diffuse reflector. Fluted vertical
upper section works in conjunction with Patented Bounding Ray™ Optical
Principle design (U.S. Patent No. 5,800,050) to provide lamp before lamp
image and smooth transition from top of reflector to bottom. Minimum flange
matches reflector finish.
•
Baffle/cone: Semi-specular clear upper reflector. Microgroove baffle with white
painted flange or specular black cone with flange that matches cone finish.
•
Hinged lampdoor provided for optimal fixture efficiency and the reduction of
stray light in the plenum.
•
Wallwash: Highly reflective outer kicker reflector provides smooth, uniform
illumination floor to ceiling, edge to edge. Inner cone is contoured to eliminate
room side flash. For optimal uniformity, the recommended luminaire spacing is
0.9m (3’) from the wall and 0.9m (3’)centers.
MECHANICAL SYSTEM
•
Pre-wired galvanized steel junction box mounted to reflector is provided with
removable access cover. Knockouts provided for power supply feed and conduit
runs. No. 12 AWG conductors, rated for 90°C.
•
Three (3) swinggate brackets allow for installation from below the ceiling.
Suitable for ceiling thickness ranging from 1.59cm (5/8”) to 2.54cm (1”).
ELECTRICAL SYSTEM
•
Horizontally-mounted, positive-latch, thermoplastic socket.
•
Thermally protected, high power factor electronic ballast (50/60Hz) mounted to
the junction box.
•
Eurostyle terminal block included for power supply and ground connections
required for CE.
LISTING
•
MVOLT, 120V and 277V fixtures are UL Listed, Non-IC recessed mounting and
damp locations. 220V and 240V fixtures are CE certified and rated IP20.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: AFI 1/26TRT 6AR 220
Series
Wattage/Lamp
Aperture/Trim color
Finish
Voltage
Ballast
Options
AFI
AFWI
1/13DTT
1/18DTT
1/26DTT
1/13TRT
1/18TRT
1/26TRT
1/32TRT
1/42TRT
6AR
Clear
6PR
Pewter
6WTR
Wheat
6CB
1
Cross baffle
6BC
1,2
Black cone
6WR
1,2
White painted
(blank) Semi-specular
LD
Matte-diffuse
MVOLT
3,5
120
5
220
4
240
4
277
5
(blank)
Electronic ballast
ECOS
Lutron
®
EcoSystem
®
electronic
dimming ballast. Minimum
dimming level 5%.
ADEZ
6
Advance Mark 10
®
electronic
dimming ballast. Minimum
dimming level 5%
ADZT
6
Advance Mark 7
®
electronic
0-10V DC dimming ballast.
Minimum dimming level 3%
VDB
7
Vossloh 0-10V dimming ballast
TRW
White painted flange
TRBL
Black painted flange
WLP
With 3500 K lamp
(shipped separately)
GMF
Single, slow-blow fuse
GLR
Single, fast-blow fuse
GSKT
Foam gasketing, ships
uninstalled
ORDERING NOTES
1.
AFI only.
2.
Not available with finishes.
3.
Multi-volt electronic ballast capable of operating on any line voltage from
120V through 277V, 50 or 60 Hz.
4.
Available with CE listing only. 220-240V, 50/ 60 Hz.
5.
Available with UL listing only. 120-277V, 50/60Hz.
6.
Available with 120V or 277V only.
7.
Available with 220V or 240V only.