Gotham 3 DLV Adjustable Downlight SpecSheet User Manual
3” dlv
Luminaire Type:
Catalog Number
(autopopulated):
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 07/24/13. Specifications subject to change without notice.
PAGE 1 OF 3
DLV-3-ADJ-OPEncOnE
Gotham Architectural Downlighting
Low Voltage Downlights
3” DLV
Adjustable Downlight
Seamless Cast Faceplate with Open Cone
Max 75 Watt
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
OPTICAL SYSTEM
•
Internal housing components painted matte black. Lamp snoot minimizes stray
light in housing.
•
Straight or tapered cut semi-specular, matte-diffuse or specular cone.
•
Seamless cast faceplate is retained by self-aligning, torsion support springs.
•
Tool-less, 0°-45° vertical adjustment and 355° horizontal adjustment.
•
Adjustment mechanism is lockable to maintain aiming during re-lamping.
•
Position indicators allow consistent aiming from fixture to fixture.
•
Accommodates up to two lenses, filters or louvers.
•
Softening lens standard.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
•
Re-lamp capability from above or below ceiling.
•
16-gauge galvanized steel mounting bars with continuos 4” vertical adjustment
are shipped pre-installed. Post installation adjustment possible without the use
of tools above or below ceiling.
•
Secondary housing adjustment system for precise, final flange to ceiling
alignment.
•
Galvanized steel junction box with hinged access covers and spring latch. Four
combination 1/2”-3/4” knockouts for straight-through conduit runs. Capacity: 8
(4 in, 4 out) No. 12 AWG conductors rated for 90°C.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box through the aperture.
•
Replaceable socket assembly. MR16 socket assembly standard.
•
12-volt electronic transformer is replaceable without the use of tools.
•
Thermally-activated insulation detector is replaceable without the use of tools.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed an labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: DLV ADJ MR16 3BCT30 120 DWHG
Series
Configuration Wattage/Lamp
Aperture/Trim color
Type
Finish
Voltage
DLV
ADJ
MR16
MR16 capability (standard)
MR11
MR11 capability
ALR12
ALR12 capability
ALR18
ALR18 capability
AR70
1
AR70 capability
3AC
clear
3BC
2
Black
3PC
Pewter
3WTC
Wheat
3GC
Gold
3MB
2
Black baffle
T30
cut for angles 25°-40°
T20
cut for angles 15°-25°
T00
cut for angles
0°-15°
(blank)
Semi-specular
LD
Matte-diffuse
LS
Specular
120
277
347
Options
RRL
3
RELOc
®
-ready luminaire. Provides compatibility with Lithonia RELOc
System. Access above ceiling required
SHHSG
4
HSG height reduced to 5-3/4” (14.6)
SF
Single fuse
Architectural colors (powder finish)
5
DWHG
Matte white (standard)
DDB
Dark bronze
DBL
Black
DWH Gloss white
DMB
Medium bronze
DNA
natural aluminum
DSS
Sandstone
DGC charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
ACCESSORIES order as separate catalog numbers (shipped separately)
•
ORDERING NOTES
1.
Clear safety glass standard with AR70 lamp designation.
2.
Not available with finishes.
3.
4.
Not available with ALR18 and AR70 lamps.
5.
Color available for faceplate. Additional architectural colors available; see