Gotham 6 GQT Ellipsoidal Tilt 400-500W SpecSheet User Manual
6” gqt

Luminaire Type:
Catalog Number
(autopopulated):
© 2005-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 07/29/13. Specifications subject to change without notice.
PAGE 1 OF 3
GQT-6-OPEn-400-500
Gotham Architectural Downlighting
Incandescent Downlights
6” GQT
Ellipsoidal Tilt
Open Reflector,
400W or 500W Quartz Halogen T4 Lamp
OPTICAL SYSTEM
•
Three preset distribution patterns allow designers to achieve various design
objectives. Clear anodized upper reflector and 6-inch self-flanged semi-specular,
matte-diffuse or specular finishing trim provide 50° cut-off, optimal efficiency
and glare control while maintaining a smooth beam pattern that is free of hot
spots and striations.
•
Compound contour finishing trim optimizes efficiency, improves beam symmetry
and visual comfort, regardless of vertical position.
•
Protective lamp guard utilizes clear ceramic technology that reduces UV emis-
sions and provides higher heat tolerance and better protection than standard
borosilicate lenses.
•
Center Beam optical system centers the lamp relative to the aperture, optimiz-
ing luminaire efficiency.
MECHANICAL SYSTEM
•
One-piece die-cast aluminum housing provides 3 square feet of surface area to
dissipate heat. Entire housing is coated with black paint to minimize visibility
when installed in open ceiling construction.
•
Tool-less, lockable 0° – 30° continuous vertical aiming appropriate for sloped
ceilings or applications requiring projection of the beam beyond nadir. Not
recommended for straight downlight applications. Full 360° horizontal adjust-
ment assures complete coverage.
•
Lamp is accessible from above or below the ceiling without the use of tools. All
hardware is captive.
•
16-gauge painted steel mounting/plaster frame accommodates up to 1-1/2”
thick ceiling materials.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Post installation adjustment possible without
the use of tools from above or below ceiling.
•
Secondary housing adjustment system for precise, final ceiling to luminaire
alignment eliminates trims that protrude into the space.
•
Galvanized steel Junction box with hinged access covers and spring latch. Three
combination 1/2"-3/4" and one1/2" knockout for straight-through conduit runs.
Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90° C.
ELECTRICAL SYSTEM
•
Heavy-duty mini-can socket for T-4 lamp is integrated into the cast housing for
effective heat dissipation.
•
Thermally-activated insulation detector.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
•
Suitable for installation on non-fire resistant material.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: GQT 500 M 6AR
Series
Lamp wattage
1
Distribution
Aperture/Trim color
Finish
Options
GQT
400
500
N
narrow
M
Medium
W
Wide
6AR
Clear
6BR
2
Black
6PR
Pewter
6WTR
Wheat
6GR
Gold
6WR
2
White
(blank)
Semi-specular
LD
Matte-diffuse
LS
Specular
SDT
Step down transformer (277V to 120V)
SF
Single fuse
TRW
White painted flange
TRBL
Black painted flange
WLP
Lamp (shipped separately)
RRL
3
RELOC
®
-ready luminaire. Provides compatibility with Lithonia
RELOC system. Access above ceiling required.
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
ORDERING NOTES
1.
Recommended for use with frosted lamp by Sylvania, GE, Philips or Ushio.
2.
Not available with finishes.
3.