beautypg.com

Gotham 6 Ecos Open Reflector SpecSheet User Manual

6” ecos

background image

Luminaire Type:
Catalog Number
(autopopulated):

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2008-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 10/30/13. Specifications subject to change without notice.

PAGE 1 OF 3

ECSR-6-OPEN

Gotham Architectural Downlighting
LED Downlights

6” Ecos™

Open Reflector

Solid-State Lighting

FE

AT

U

RE

S

OR

DER

ING

IN

FO

RM

AT

ION

N

OT

ES

ORDERING NOTES

1.

Not available with finishes. TRW standard.

2.

Height of fixture increases 3”.

3.

For dimensional changes, refer to

TECH-140

.

4.

For compatible RELOC systems, refer to

TECH-110

.

EXAMPLE: ECSR 35/14 6AR LD 120

Series

Color temperature

Nominal lumen values

Aperture/Trim color

Finish

Voltage

Driver

ECSR

35/

3500 K

41/

4100 K

14

1400 lumens

6AR

Clear

6PR

Pewter

6WTR

Wheat

6GR

Gold

6MB

1

Black baffle

6WR

1

White painted

6WB

1

White baffle

(blank)

Semi-specular

LD

Matte-diffuse

120
277
347

2

(blank)

0-10V dimming ballast

Options

SF

Single fuse

EL

3

Emergency battery pack with integral test switch

ELR

3

Emergency battery pack with remote test switch

ELRHL

3

High-lumen-output emergency battery pack with
remote test switch

TRW

White painted flange

TRBL

Black painted flange

RRL

4

RELOC

®

-ready luminaire. Provides compatibility with Lithonia RELOC

system. Access above ceiling required.

CP

Chicago plenum

MFLG

Microflange™ trim

NEPP

Interface for Sensor Switch

®

nLight

®

network with integral power supply.

Refer to

TN-623-01

.

NSD

Sensor Switch

®

nLight

®

dimming relay. One 5A relay with one 0-10 VDC

dimming output, shipped installed. Refer to

nSP5-D

.

OPTICAL SYSTEM

Self-flanged, semi-specular or matte-diffuse lower reflector in combination with
highly reflective/diffuse upper reflector provides unparalleled performance and
efficiency. Patented Bounding Ray™ Optical Principle design (U.S. Patent No.
5,800,050) provides source before source image and smooth transition from top
of the reflector to bottom.

MECHANICAL SYSTEM

Housing accommodates a maximum 1-1/2” ceiling thickness.

Light engine and driver are accessible from above or below ceiling and can be
upgraded to accommodate future technology improvements.

16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Post installation adjustment possible without
the use of tools from above or below ceiling.

Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2”-3/4” and one 1/2” knockout for straight-through conduit runs.
Capacity: 8 (4in, 4out) No. 12 AWG conductors rated for 90°C.

Secondary housing adjustment system for precise, final ceiling to flange
alignment.

ELECTRICAL SYSTEM

Solid state LED light engine available in 3500 K or 4100 K color temperatures.

Class P, thermally protected 0-10V solid-state dimming driver.

Rated system life of 50,000 hours at 70% output.

Thermally activated insulation detector.

Emergency battery pack and SIMPLY5™ energy management system available.

Luminaire should be installed in applications where ambient temperatures do not
exceed 50°C. Ambient temperatures that exceed 50°C will result in reduced lamp
life and will void warranty.

LISTING

Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.

WARRANTY

5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx