Gotham 6 Evo Open Reflector SpecSheet - Manual

Luminaire Type:
Catalog Number
(autopopulated):
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/18/14. Specifications subject to change without notice. PAGE 1 OF 3
EVO-6-OPEN
Gotham Architectural Downlighting
LED Downlights
6” Evo ®
Open Reflector
Solid-State Lighting
OPTICAL SYSTEM
•
Self-flanged semi-specular, matte-diffuse or specular lower reflector
• Patented Bounding Ray™ optical design (U.S. Patent No. 5,800,050)
• 45° cutoff to source and source image
• Top-down flash characteristic
MECHANICAL SYSTEM
•
16-gauge galvanized steel construction; maximum 1-1/2” ceiling thickness
• Telescopic mounting bars maximum of 32” and minimum of 15”, preinstalled,
4” vertical adjustment
• Toolless adjustments post installation
• Junction box capacity: 8 (4 in, 4 out ) 12AWG rated for 90°C
• Light engine and driver accessible through aperture
ELECTRICAL SYSTEM
•
Fully serviceable and upgradeable lensed LED light engine
• 70% lumen maintenance at 60,000 hours based on IESNA LM-79-2008
• 120-277VAC, 50/60hz power supply with 0-10V dimming (10-100%)
• Overload and short circuit protected
• LEDs tested under LM80
LISTINGS
•
Fixtures are CSA certified to meet US and Canadian standards; wet location,
covered ceiling
WARRANTY
•
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: EVO 35/10 6AR 120
Series Color temperature Nominal lumen values Aperture/Trim color Distribution Finish Voltage
EVO 27/ 2700 K
30/ 3000 K
35/ 3500 K
41/ 4100 K
10 1000 lumens
14 1400 lumens
18 1800 lumens
22 2200 lumens
6AR Clear
6PR Pewter
6WTR Wheat
6GR Gold
6WR 1 White
(blank) 1.0 s/mh
VND Very narrow (0.5 s/mh)
ND Narrow (0.6 s/mh)
MD Medium (0.8 s/mh)
WD Wide (1.2 s/mh)
(blank) Semi-specular
LD Matte diffuse
LS Specular
MVOLT
120
277
347
2
Driver Options
(blank) 3 0-10V dimming driver. Minimum dimming level 10%
ECOS2 4,5 Lutron ® Hi-Lume ® 2-wire forward-phase dimming
driver. Minimum dimming level 1%
ECOS3 3,4 Lutron ® Hi-Lume ® 3-wire or EcoSystem ® dimming
driver. Minimum dimming level 1%
SF Single fuse
RRL__ RELOC ® -ready luminaire connectors enable a simple
and consistent factory installed option across all
ABL luminaire brands. Refer to
RRL for complete
nomenclature.
NEPP 6 Interface for Sensor Switch ® nLight ® network provided
with integral power supply. Refer to TN-623-01 .
NSD 6 Sensor Switch ® nLight ® one 5A relay with one 0-10
VDC dimming output; requires bus power, such as
nPP16 power pack. Refer to
nSP5-D .
TRW 7 White painted flange
TRBL Black painted flange
EL 8,9 Emergency battery pack with integral
test switch
ELR 8,9 Emergency battery pack with remote
test switch
CP 10 Chicago plenum
BGTD Bodine generator transfer device
ACCESSORIES order as separate catalog numbers (shipped separately)
SCA6 Sloped ceiling adapter. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D). Ex: SCA6 10D. Refer to TECH-190 .
CTA4-8 YK Ceiling thickness adapter (extends mounting frame to accommodate ceiling thickness up to 2”).
GVRT Vandal-resistant trim accessory. Refer to TECH-200 .
ISD BC 0-10V wallbox dimmer. Refer to ISD-BC .
NSP5 D ER KIT Sensor Switch nLight secondary relay and dimming pack device used to switch and dim luminaires powered via an emergency circuit. Refer to NSP5 D ER KIT .
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION