Extron Electronics HAE 100 User Guide - Manual (Page 24)

Command and Response Table for SIS Commands
Command ASCII
Command
(host to unit) Response
(unit to host) Additional Description
Signal status
Request all signal status
E LS } SigI X!• SigO X!• HdcpI X!•
HdcpO X!• AudI X@• AudO X#]
Switch status
Request all rear panel
switch status
E STAT } AudFmt X$• EdidStr X!•
HdmiAud X!]
Unsolicited response.
EDID Minder
Assign factory EDID
E A* X% EDID } EdidA X%]
View factory EDID E A*EDID } X%]
View EDID native resolution E N*EDID } X^] Example: 720p @ 60Hz
View current EDID in hex E R*EDID } X&] View EDID in HEX format.
View information, part number, and firmware
Request part number
N/n 60-xxxx-xx ]
Query firmware version Q/q X*] View firmware build with two
decimals (for example, x.xx).
Reset
Reset
E ZXXX } Zpx ] Resets the unit.
HAE 100 HDMI Audio Extractor • SIS Commands 19