Extron Electronics HAE 100 User Guide - Manual (Page 20)

4. On the next screen, enter the requested information, then click
Download fw_loader_vnxnxn.exe (where n is the Firmware Loader version number).
5. Follow the instructions on the rest of the download screens to save the executable
Firmware Loader installer file to the computer. Note the folder where the file is saved.
6. Using the file browser, locate the downloaded executable installer file and run it.
7. Follow the instructions on the Installation Wizard screens to install the Firmware Loader
software. Unless specified, the installer program places the Firmware Loader software at
C:\Program Files\Extron\FWLoader .
Using Firmware Loader
Use the following procedure to install firmware to the HAE 100 using Firmware Loader. For
more information on Firmware Loader, access the help file by selecting
Help > Help from
the menu bar or by pressing the key from within the program.
1. Open the Firmware Loader program by double-clicking on the HAE 100 icon on the
desktop.
2. The Add Device window appears.
NOTE: If the Add Device window does not appear, select Edit > Add Device(s)
from the menu bar.
3. On the Add Device window (see figure 7):
Figure 7. Add Device Window
a. Select the HAE 100 device from the Device Name drop-down menu.
b. Select the USB option from the Connection Method drop-down menu.
c. Select the Extron USB Device option from the Available Devices drop-down
menu.
d. Click Connect . When the connection is made, the HAE 100 appears in green text
with a check mark next to it.
e. Click the Browse button to open the Choose Firmware File browser.
HAE 100 HDMI Audio Extractor • Firmware Updates 15