Extron Electronics HAE 100 User Guide - Manual (Page 23)

Symbol definitions
] = CR/LF (carriage return/line feed)
} = Carriage return (no line feed, hex 0D)
• = space
X! = 0 = Not detected / Off
1 = Detected / On
X@ = Audio input format:
0 = No signal
1 = 2CH PCM
2 = Bitstream
X# = Audio output format:
0 = No signal
1 = Analog and S/PDIF
2 = S/PDIF only
X$ = Audio Format toggle switch position:
0 = Analog
1 = S/PDIF
X% = 1 = 720p @ 60Hz native EDID (default)
2 = 1080p @ 60Hz native EDID
X^ = Native resolution and refresh rate (translated from EDID detailed timing I)
X& = EDID 256 bytes in HEX format
X* = Controller software version to the second decimal place
ASCII to Hex Conversion Table
•
Space
HAE 100 HDMI Audio Extractor • SIS Commands 18