Extron Electronics FOX 3G HD-SDI User Guide - Manual (Page 19)

Rack shelf mounting instructions
On the 6-inch and 9.5-inch rack shelves, the transceiver unit can be mounted in the front or
the rear of the rack.
1. Remove the feet from the bottom of the transceiver unit if installed.
2. Mount the transceiver unit on the rack shelf, using two 4-40 x 3/16-inch screws in
opposite (diagonal) corners to secure it to the shelf (figure 7).
(2) 4-40 x 3/16"
Screws
Use 2 mounting holes on
opposite corners.
Rack Shelf
1/4 Rack Width Front
False Faceplate
Figure 7. Mounting the Unit on a 3-inch Rack Shelf
3. Install blank faceplate(s) or other unit(s) on the rack shelf.
4. Attach the rack shelf to the rack using the supplied bolts.
1U Universal Rack Shelf
Figure 8. Mounting the Unit on a Universal Rack Shelf
FOX 3G HD-SDI • Reference Information 15