Fiber compatibility indications, System operation, Fiber compatibility indications system operation – Extron Electronics FOX 3G HD-SDI User Guide User Manual

Page 13

Text mode
Original mode

Fiber Compatibility Indications

You must use the proper fiber cable for your transceivers. Each transceiver indicates its fiber
compatibility, singlemode or multimode, at power-up by blinking the four Rate indicators.

•

Multimode — The Rate LEDs blink once.

•

Singlemode — The Rate LEDs blink twice.

NOTES: • To determine the fiber cable type, observe the cable jacket. Typically,

singlemode fiber cable has a yellow jacket and multimode fiber cable has an
orange or aqua jacket.

• All transceivers in the system must be the same model (all singlemode or all

multimode). Mixed transmission mode units will not work together.

FOX 3G HD-SDI • Installation and Operation