Extron Electronics FOX 3G HD-SDI User Guide - Manual (Page 15)

Maximum receiver sensitivity
Singlemode ...................... -18 dBm, typical
Multimode ....................... -12 dBm, typical
Optical loss budget
Singlemode ...................... 13 dB, maximum
Multimode ....................... 7 dB, maximum
Video
Signal type .................................. HD-SDI, SDI, and 3G-SDI digital video signals
Gain ............................................ Unity
Resolution ................................... 8 or 10 bits, automatic
Data rates ................................... 270 Mbps, 1.485 Gbps, 2.970 Gbps
Operation standards .................... SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120
Auto data rate lock ..................... Yes
Video input— transmitter
Number/signal type ..................... 1 single link SDI, HD-SDI, or 3G-SDI digital component video
Connectors ................................. 1 female BNC
Data rates ................................... 19 Mbps to 2.97 Gbps
Nominal level .............................. 0.8 Vp-p
Minimum/maximum levels ........... 0.5 V to 1 Vp-p with no offset
Impedance .................................. 75 ohms
Return loss .................................. >15 dB @ 5 MHz to 1.5 GHz
>10 dB @ 1.5 GHz to 3 GHz
DC offset (max. allowable) .......... 5 V
Input coupling ............................. AC
Input cable equalization .............. Automatic for up to -30 dB of cable loss
HD-SDI ............................. 120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cable
SDI ................................... 150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and
display used in the system.
Video output— receiver
Number/signal type ..................... 2 single link SDI, HD-SDI, or 3G-SDI digital component video
Connectors ................................. 2 female BNC
Re-clocking ................................. Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for unrecognized rates
Nominal level .............................. 0.8 Vp-p
Minimum/maximum levels ........... 0.5 V to 1.0 Vp-p
Impedance .................................. 75 ohms
Return loss .................................. <-25 dB @ 100 MHz
DC offset .................................... ±5 mV with input at 0 offset
General
External power supply ................. 100 VAC to 240 VAC, 50-60 Hz, 6 watts, external; to 12 VDC, 1 A, regulated
Power input requirements ........... 12 VDC, 0.3 A
Temperature/humidity ................. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ....................................... Convection, no vents
Mounting
Rack mount ...................... Yes, with optional rack shelf kit
Furniture mount ............... Yes with optional through-desk or under-desk mounting kit
Pole mount ....................... Yes, with optional pole mounting kit
Enclosure type ............................. Metal
FOX 3G HD-SDI • Reference Information 11