Extron Electronics DXP DVI Pro Setup Guide - Manual (Page 38)

32
DXP DVI Pr
o and DXP HDMI Series • Remote Contr
ol
Command Function
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Reset
System reset to factory defaults
E
ZXXX
}
Zpx
] Clear all ties and presets and reset unit to
factory default settings.
NOTE: This command excludes IP settings such as IP address, subnet mask, and gateway address. It does not remove the file system.
Absolute system reset E
ZQQQ
}
Zpq
] Clear all ties and presets and reset unit to
factory default settings.
NOTE: This command includes resetting the IP address to 192.168.254.254 and the subnet mask to 255.255.0.0. The firmware version
remains the same.