Extron Electronics DXP DVI Pro Setup Guide - Manual (Page 34)

28
DXP DVI Pr
o and DXP HDMI Series • Remote Contr
ol
Command Function
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Save and Recall Presets
NOTE: If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.
Save current configuration as a global
preset X&
, Spr
X&]
Save global preset
X&
.
Command character is a comma.
Example: 9, Spr09
] Save current set of ties as preset 9.
Recall a global preset X&
. Rpr
X&] Command character is a period.
Example: 5. Rpr05
] Recall preset 5, which becomes the current
configuration.
Front Panel Lock (Executive) Modes
NOTE: See “ Locking and Unlocking the Front Panel (Executive Modes) ” in the "Operation" section for more on the lock modes.
Lock all front panel functions 1X Exe1
] Enable lock mode 1.
Lock advanced front panel functions 2X Exe2
] Enable lock mode 2.
Unlock all front panel functions 0X Exe0
] Enable lock mode 0.
View lock status (executive mode) X X$]
Display current lock mode
X$
.
EDID (Extended Display Identification Data) Commands
Assign EDID data to an input
E
A
X!
*
X1(
EDID
}
EdidA
X!
*
X1(]
Assign EDID file
X1(
to input
X!
.
Assign EDID data to all inputs E
A
X1(
*EDID
}
EdidA00*
X1(] Assign EDID information files to all inputs.
See the
EDID Reference Table on page 24
for a list of values contained in each EDID
file.
NOTE:
X!
= Input number 1 – maximum number of inputs for your model
X$
= Current front panel lock mode 0 = unlocked 1 = all front panel functions locked 2 = basic functions unlocked
X&
= Global preset number 01 – 32
X1(
= EDID file reference number 01 – 40 (32 = default 720p @ 60 Hz)