Extron Electronics DXP DVI Pro Setup Guide - Manual (Page 22)

16 DXP DVI Pro and DXP HDMI Series • Operation
Saving or Recalling a Preset
1. Save a preset — Press and hold the Preset button until it flashes.
Recall a preset — Press and release the Preset button.
PRESET PRESET
PRESET PRESET
Preset button blinks.
Press and hold.
2 seconds
Save a
preset
Recall a
preset
Preset button lights.
Press and release.
• All input and output buttons with assigned
presets light red.
• The configuration data at the assigned
preset locations is overwritten.
INPUTS
1 2 3 4 5 6 7 8
Figure 14. Saving or Recalling a Preset
2. Press and release the desired input or output button.
The button blinks red to indicate that
this preset is selected to save or recall.
The Enter button blinks
red to indicate the need to
activate the save or recall.
1
ENTER
Figure 15. Press an Input or Output Button to Select a Preset
3. Press and release the Enter button.
Locking and Unlocking the Front Panel (Executive
Modes)
The matrix switcher has three levels of front panel security lock that
limit the operation of the switcher from the front panel:
• Lock mode 0 — The front panel is completely unlocked.
• Lock mode 1 — All changes are locked from the front panel
(except for setting lock mode 2). Some functions can be viewed.
• Lock mode 2 — Basic functions are unlocked. Advanced
functions, such as setting video and audio mute, are locked and
can be viewed only.
• Basic functions consist of:
• Making ties
• Saving and recalling presets
• Changing lock modes