Extron Electronics DXP DVI Pro Setup Guide - Manual (Page 21)

15 DXP DVI Pro and DXP HDMI Series • Operation
Operations
Creating a Tie
To tie an input to an output:
1. Press and release the Esc button to clear any input button, output
button, or control button indicators that may be lit.
2. Press and release the Video and Audio I/O buttons to select or
deselect video and audio as desired.
Green when selected
Off when deselected
Red when selected
Off when deselected
I / O
VIDEO AUDIO
Figure 11. Audio and Video I/O Buttons
NOTE: Audio or video can be broken away (selected, not tied)
by pressing only the Video or only the Audio button.
3. Press and release the desired input button.
The button lights to indicate the selection.
5
Figure 12. Select an Input for the Tie
4. Press and release the desired output buttons.
ENTER
4 8
Amber indicates a video and audio tie.
Green indicates a video-only tie.
Red indicates an audio-only tie.
Green indicates the need
to confirm the change.
3
Figure 13. Select an Output for the Tie
5. Press and release the Enter button. All button indicators turn off.