beautypg.com

Installing and cabling aaps, Plan for aaps cable the aaps – Extron Electronics Cable Cubby 200 User Manual

Page 12

background image

Cable Cubby 200 • Installation

7

1. Plan for AAPs

TIP: Typical installations consist of a VGA (large

hole), an audio (small hole), and a network
(medium hole) cable. In a
non-standard installation, match the
diameter of the cable to the size of the
hole that best applies.

NOTE: Pass-through AAPs can also be

replaced by optional passive AAPs for
further customization (see “

Installing

Optional Passive AAPs

” on page

8).

2. Cable the AAPs

a.

Remove a segment of a set of split AAPs by
unscrewing the nuts on the underside of the
shelf.

b.

Thread the cables through the half-moon
cutouts of the pass-through AAP segment
mounted to the shelf bracket (see

É

).

c.

Secure the remaining pass-through AAP
segment to the shelf bracket with the provided
#4-40 nuts.

Cable hole

Hole size

Grommet size

Large

0.625" (1.59 cm)

0.453" (1.15 cm)

Medium

0.562" (1.43 cm)

0.390" (0.99 cm)

Small

0.5" (1.27 cm)

0.312" (0.79 cm)

Large Medium Small

Cable Hole

Hole Size

Grommet Size

Large

0.625” (1.59 cm)

0.453” (1.15 cm)

Medium

0.562” (1.43 cm)

0.390” (.99 cm)

Small

0.500” (1.27 cm)

0.312” (0.79 cm)

#4-40 Nut w/

Captive Washer

З

Й

Secure one

segment first.

Installing and Cabling AAPs

The Cable Cubby 200 has a fixed AAP shelf. Three half-moon cutouts in the set of cable
pass-through (split) AAPs loosely channel three cables in the Cable Cubby. Each channel
and each associated split grommet is a different size. Match the diameter of the cable to the
size of the channel. For Cable Retractor installation details, refer to the Cable Retractor User
Guide
on the Extron website,

www.extron.com

.

CAUTION: Risk of injury to the eyes.

Wear safety glasses when operating the router.
Failure to comply can result in injury.

d.

Using a router with a 5/8 inch (16 mm) outside
diameter guide bushing and a 1/2 inch
(12 mm or 12.7 mm) diameter straight router
bit, carefully cut the opening in the surface.

e.

Remove the C-clamps and the routing template
assembly.

CAB

LE CU

BBY 2

00

CA

BLE CU

BBY 20

0

USE

R A

CCES

S

200

CAB

LE

CU

B

CAB

LE

CU

BB

USE

R AC

C

USE

R AC

Router