Xylem Multi 3410 User Manual
Multi 3410
Table of contents
Document Outline
- 1 Overview
- 2 Safety
- 3 Commissioning
- 4 Operation
- 4.1 Switching on the meter
- 4.2 Login with a user name
- 4.3 General operating principles
- 4.4 Sensor-independent settings
- 4.5 Sensor info
- 4.6 pH value
- 4.6.1 General information
- 4.6.2 Measuring the pH value
- 4.6.3 Settings for pH measurements
- 4.6.4 pH calibration
- 4.6.5 Calibration interval
- 4.6.6 Carrying out an automatic calibration (AutoCal)
- 4.6.7 Carrying out a manual calibration (ConCal)
- 4.6.8 Displaying calibration records
- 4.6.9 Continuous measurement control (CMC function)
- 4.6.10 QSC function (sensor quality control)
- 4.7 ORP voltage
- 4.8 Dissolved oxygen
- 4.9 Conductivity
- 4.10 Data storage
- 4.11 Transmitting data (USB interfaces)
- 4.11.1 Outputting current measurement data
- 4.11.2 Transmitting data (to a PC)
- 4.11.3 Connecting the PC / USB-B interface (USB Device)
- 4.11.4 Options for data transmission to a PC (USB-B interface)
- 4.11.5 Connecting the USB memory device / USB-A interface (USB Host)
- 4.11.6 Data transmission to a USB memory device (USB-A interface)
- 4.12 Reset
- 5 Maintenance, cleaning, disposal
- 6 What to do if...
- 7 Technical data
- 8 Lists
- 9 Appendix: Firmware update