4 settings for ids conductivity sensors, Settings for ids conductivity sensors – Xylem Multi 3410 User Manual
Page 82
Operation
Multi 3410
82
ba75863e11
02/2011
4.9.4
Settings for IDS conductivity sensors
Overview
The following settings are possible for IDS conductivity sensors:
z Calibration record (display)
z Calibration data storage (display)
z Calibration interval
z Reference temperature
z Temperature compensation
z TDS factor
z Unit of the temperature
Settings
The settings are made in the menu for the measured parameter, con-
ductivity. To open the settings, display the required parameter in the
measured value display and press the key. After
completing the settings, switch to the measured value display with
The possible settings are individually displayed for each sensor. Below
the setting menu is displayed for two IDS sensors (TetraCon 925,
LR325/01).
Default settings are printed in bold.
Setting menu of
TetraCon 925
Menu item
Possible
setting
Description
Calibration /Cali-
bration record
-
Displays the calibration record of
the last calibration
Calibration /Cali-
bration data stor-
age
-
Displays the last calibration
records (max. 10)
Calibration /
Calibration data
storage / Copy to
USB flash drive
-
Outputs the calibration data sto-
rage to a connected USB flash
drive
Calibration /Cali-
bration interval
1 ... 150 ...
999 d
Calibration interval for the IDS
conductivity sensor (in days).
The meter reminds you to cali-
brate regularly by the flashing
sensor symbol in the measuring
window.