Xylem System 5000 Getting Started Guide - Manual (Page 13)

11
System 5000™ Software
Once a Task Input has been defined,
press “Add Output” on the “Edit Task”
screen.
To log the value of the Task’s Input to a
file, select “Log To File (New Log File)”
from the list of available inputs. This
will create a new log file for the Task to
log to. Press the “OK” button to open
the Log To File Properties page.
If one or more Log files are already
configured, they will appear as options
in the Add Output menu (e.g. “Log To
File (SiteID.csv)”).
Adding an Output/Destination
(Log to File)
A new log file will be named after the
System 5000™’s Site ID and log the
Date, Time, and the Task’s Input value.
To log at a different rate or based
on a condition, the Timed Rate and
Conditional options can be modified.
On the ‘Log To File Properties’ page,
press the “Edit” button next to the
grayed out “Add” button to change
the default log file properties.
The screen to the right defines the
basic options for the data file. The file
may be renamed, previewed, and/or
customized. Additional options can be
found under the Advanced Options
menu via the “Edit Options” button.
When finished editing the log file properties, press “OK” to return to the “Log To File Properties”
page, then “OK” again to return to the “Edit Task” screen.