Xylem System 5000 Getting Started Guide - Manual (Page 10)

8
SYSTEM 5000™ SOFTWARE
From the main menu, press the “System Setup” button to open the setup menu. With the “General
Setup” tab selected and the “Date & Time” option highlighted, press the “Open” button to enter the
“Date & Time Setup” screen.
Setting the Data and Time
The date, date format, and time are set
within this menu.
Notice the two “Edit” buttons used to
set the time and to select a date format.
The date is set by selecting the day in the
displayed calendar.
When setting the new time, press the “OK”
button when the actual time matches
the displayed time. Then press the “OK”
button on the “Date & Time Setup” menu
to save the new time as the system time.
With the time and date set, press the “OK”
button and then the “Exit” button to back
out to the main menu.